Rivermead Central

40057

Western Thunderer
A bit of time spent on the Benham’s warehouse over the last couple of days.

First, the lead flashing along the top of the canopy. I made this of heavy-gauge paper (165g/m2). I was concerned the paper would cockle when painted, so soaked and stretched it first. It behaved and strips were glued in place yesterday to represent flashing:

A7972E87-00E1-4DAC-BAE2-9789FDB93378.jpeg

I have now also added the coping to the top of the wall behind the canopy:

D282E63D-2C9B-4C9F-8008-FE3D3221B81B.jpeg

The coping is wood and it is secured by countersunk wood screws vertically down into the wall. Also glued. I hope the strength of the joints will resist any attempt by the canopy or coping to warp. The building is essentially made of wood, so warping is a risk — but the material is appropriate for Rivermead Central, in keeping with the approach used for model railway buildings in the first half of the 20th century.
 

40057

Western Thunderer
As the weather was suitable today, I took the Benham’s warehouse building outside and gave the top of the building a light spray coat of matt varnish. I am very happy with the result:

2BAA09E9-CACC-4DA8-BF20-DB954F1E8102.jpeg

773C4302-8784-4204-81D9-8A25A7331BA7.jpeg

I am particularly pleased with the slates which are impressed into a sheet of plywood, but after painting look really convincing.

So, some weathering needed on the coping. Fit the doors (already made). Make and fit the windows. Add the railings to the ends of the loading platform. Then it’s done.
 

40057

Western Thunderer
Weathering done! I think (hope) all the painting is complete on the Benham’s warehouse. It still needs doors, windows and railings fitted, but now looks like this:

9A9FDEC8-0F05-4E92-B959-325DF548CE56.jpeg

59595D6C-4876-458A-A91D-FB9380059062.jpeg

F55D208E-D1C2-4E7B-93FC-195BDF95FC87.jpeg

BBACD006-C5B1-4874-A90A-891831692242.jpeg

Since Saturday, weathering added to the coping and roof. I am happy with the result. As modelled, it will not have been an old building — but in an industrial setting and next to a railway, the atmosphere will have been continuously smokey, so soot staining won’t have taken long.

The back is not detailed but I don’t like untidy work, even where it can’t be seen. So it’s painted and neat, but with no representation of bricks etc:

625E8922-0DE3-41D5-A719-789AD1905610.jpeg

The ‘shutter’ is in place behind the middle window aperture. It’s painted black on the inside so that is what will be seen through the window (see image above), instead of the blue painted wall of the room. There are shutters for all the windows.
 

40057

Western Thunderer
Onwards with the Benham’s warehouse!

Doors now fitted:

175875C0-231F-4F39-B8C7-4DB45EFE5302.jpeg

4FB62DE6-7B5B-4ADC-8F0E-F52E6F165E3B.jpeg

Also, started on the windows:

90F80489-3C5D-409A-9EBD-670818C97EA4.jpeg

The frame is from LCUT Creative, to fit the apertures in the panels used in the building. The glass is, well, glass. My late father was a microbiologist and I found these large-size microscope slides when we were clearing his shed. They are certainly old, possibly actual antiques. Anyway, I kept them for exactly this purpose.

Not much to do now to get this one finished.
 

40057

Western Thunderer
Two windows installed in the Benham’s warehouse:

4063D4B6-942B-415F-8736-78E386FE0D0E.jpeg

(Sorry about the indifferent photo — taken indoors in poor light.)

That’s the left-hand end of the building actually complete. There is a black painted board about an inch behind the windows, but in the above photo it is the reflection in the glass that is mostly visible. I do prefer the use of glass to represent glass. As it has a truly plane surface, the glass in the model windows reflects light in the same way as real windows do.
 

40057

Western Thunderer
Distractions. Others on WT have commented on how easily modelling activities can be diverted away from the intended priority and onto some other task. In this case, I have been distracted by the arrival in the post of some spare wagon wheel-sets. These will allow a wagon that has been wheel-less for many years to be put back into service. It’s a super wagon, pre-WW1, and was a birthday present from my wife when I was a lot younger than I am now. Finally, I have found some spare wheels of the type the wagon had when new. Now, at last, it can be complete again — and I’m just going to get that job done ASAP.

So this brings me to tinplate wagons. Nearly every toy and model railway between 1900 and the 1960s had tinplate wagons. Given the aim of Rivermead Central is to create a vintage style model railway using preserved historic model railway equipment, tinplate wagons are something I must have. They won’t look right alongside the more scale models built of wood and metal, thus I intend to have alternative sets of rolling stock. Then, some days, Rivermead Central can be operated using tinplate rolling stock, some days using vintage wooden/metal scale models. There will only be five or six sidings for wagon storage on the completed layout. Around 25 wagons will be enough for an interesting operating session, but not fill the sidings, so that’s about the number I need to have.

Before coming on to the particular wagon now being re-wheeled (in a later post), some introductory comments about the range of tinplate wagons sold by Bassett-Lowke in the 1909–1914 period. These wagons were designed by Henry Greenly and made by the Nuremberg firm Carette (see my post #55), exclusively for sale by Bassett-Lowke. Arguably, this series of wagons were the finest tinplate wagons ever made. The quality of the artwork and lithograph printing of the bodies is outstanding. The printed bodies were assembled using the well-known ‘tab-and-slot’ method. The W-irons however were attached to the solebars by soldering to allow the wheel-base to varied, depending on the prototype. The solebars (and whole under-frame) therefore could not be lithograph printed, but was painted. However, litho-printed tinplate strips were clipped to the face of the solebars to provide detail. Roofs, where present, were painted.

The range of tinplate wagons listed by Bassett-Lowke just prior to WW1 was extraordinary. I doubt if any modern manufacturer could equal it. There were numerous different types of open wagon and covered vans. But also specialist vehicles including rectangular and cylindrical tanks, bolster-twins, brake vans, bogie loco coal and trolley wagons. The wagons have serial numbers which are included in the lithography. The numbers run from 1341 to 13449. On an 0 gauge wagon, the serial number appears as 134X - 35. The ‘35’ signifies the gauge — 0 gauge then being measured between the centres of tinplate rails, 35 mm. With one exception, all the types of wagon made were offered in 0 gauge. Nearly all were also made in Gauge 1. About half, those introduced first, in 1909, were additionally produced in Gauge 2 versions. Just considering the 0 gauge vehicles, there are a lot more than 48 different models. The serial number 13413 was used for a private-owner mineral wagon. This carried a fictitious livery, ‘Bassett-Lowke’. In 1909, this wagon had a red coloured body. Then there were grey and black versions (I’m not sure which came first) which had the same lettering, just a different body colour. Finally, shortly before WW1, the artwork changed with ‘Bassett-Lowke’ now on a diagonal stripe and an overall brown body colour. These four distinct wagons, produced successively, each had the serial number 13413. Serial number 13425 was used for a covered van with a yellow-coloured body. Three types were produced each with an appropriate suffix added to the serial number: 13425BL was a private-owner van belonging to Bassett-Lowke (fictitious); 13425M was Colman’s mustard, and; 13425S was for Colman’s starch traffic. Additional to these clearly different models using the same serial number, there were variations in running number. Many of the models introduced in 1909 were numbered ‘1909’. Popular types were reprinted as further production was required. Some models introduced in 1909 are also found numbered 1911 and, say, 1912 and 1914. Lots of scope here for collecting variants and trying to get ‘a set’, if that is your interest.

To start at the beginning, the serial number 1341 was used for an LNWR brake van:

CBC8564F-32CA-4665-91CD-A9D5F08F704F.jpeg

The serial number is on the solebar. This, obviously, is not the wagon waiting for wheels! Indeed, the wheels I have just obtained are not the type this wagon will have had fitted originally. This van, I’m afraid, is sat in the queue of wagons awaiting repair. It illustrates some points about finding wagons of this age suitable for use on Rivermead Central. The condition is not too bad — some chips and scratches to the paintwork and lithography, but no serious corrosion. Both headstocks are pushed inwards around one of the buffers, presumably by a rough shunt sometime in the distant past. These wagons are built of quite thin gauge tinplate and are often badly rusted around the W-irons where the acid flux was not completely cleaned off after soldering. So there is an inherent fragility and, I’m sure, was no intention by the manufacturer to design the wagon for a working life of more than 100 years. The litho printing is effectively not restorable. The roof could be repainted — but I certainly won’t be doing that for the van pictured above. That’s a pretty good roof — much, much better than most. The wheels currently on the above brake van are Carette, but later than the van and refitted on non-original (? Hornby) axles. This highlights another issue. The original owners of these Carette-made wagons are all dead. The wagons that come up for sale now haven’t emerged from someone’s attic following the death of an elderly relative who had them as a child. These wagons have, almost always, been in someone’s collection — and often show signs of previous repairs or restoration attempts, not always expertly carried out.

The wheels were a definite weakness in the design of the Carette-made wagons. The early production was fitted with wheels pressed from sheet metal. Later wagons were fitted with cast lead alloy wheels. My experience is the vast majority of these Carette-made wagons no longer have the original wheels. I think that is because the wheels really were not very good. They were commendably narrow, but surviving wheel sets almost invariably have wheels that are way out of true, and often the axles are bent where the axle was splined to provide grip for fixing the wheels. These issues are so generally present, I think they are manufacturing faults, rather than damage in use. Probably to address such problems, a previous owner of the above brake van has removed four cast lead Carette wheels from their axles (easily done) and pushed them onto some different axles where they are free to turn independently. In fact, the above brake van should have the pressed sheet-metal type of wheels. I have no spare sets of these, so it will have to wait.

That will do as a general picture of the Carette-made Bassett-Lowke wagons. I will get back now to the wagon I am at last able to fit with the correct wheels, and report on that in a future post.
 
Last edited:

michael mott

Western Thunderer
I am enjoying the ongoing education that you are providing about this early stage of our hobby. I spent many an afternoon playing with the more modern versions of these tinplate models at a friend’s house.
Michael
 

40057

Western Thunderer
I am enjoying the ongoing education that you are providing about this early stage of our hobby. I spent many an afternoon playing with the more modern versions of these tinplate models at a friend’s house.
Michael
Thank you, Michael.

I think these early tinplate models are wonderful objects. I guess when they were new it would have been appropriate to judge them primarily on the criterion of how accurately they portrayed the real wagon they represented. That’s essentially what most modellers do for models made today. But now I feel age, historic context and scarcity has made these 100-year-old wagons ‘things’ in their own right. They don’t just exist as miniature copies of full size vehicles, they have their own history and importance. They can be studied and appreciated both for what they are and for what they were intended to represent.
 

Yorkshire Dave

Western Thunderer
All very interesting.

Although the locomotives and rolling stock are not to scale by today's standards it does show how the hobby has developed over the last century alongside materials science and manufacturing methods.

The models in a way act as a colour archive as they provide us with a guide, with tolerances for accuracy, to the liveries and lettering used by the various railway companies - especially the private owner wagons commissioned (for advertising?) by companies at the time with prototypical liveries.

In their day when new the early models would have had the 'wow' factor by being some of the smallest and possibly relatively affordable working models at the time. Providing children (and adults) something closely representing to what they would have seen running on the railway as a matter of course in the period.
 

40057

Western Thunderer
Those spare wagon wheel-sets received in the post a few days ago (see my post #129). Three wheel-sets (ie. three axles) for the wagons made by Carette and sold exclusively by Bassett-Lowke. All three of the type with cast lead alloy wheels. I am not sure when these replaced the earlier type of Carette wagon wheel-set, with wheels made of sheet metal. There would be no reason for a change of manufacturing process to be mentioned in catalogues or advertising. One possibility is the cast wheels were introduced with the new wagons added to the range in 1911.

Anyway, as received, all three of the wheel-sets had at least one wheel badly out of true. So much so, that none of them was useable. The wheel castings are generally not terribly round. Someone had tried to make one of the wheels a bit more round, using a file — spoiling the wheel in the process. I decided one wheel was fine as it was, but the others would have to be taken off their axles. This is easy to do by lightly tapping the end of the axle with a hammer. That done, I could proceed with straightening the axles and choosing the best wheels to make up two useable wheel-sets.

The axles are chemically blackened steel, splined to provide fixings for the wheels:

5004379B-6B8A-4B23-900C-8465DF255BEF.jpeg

The upper axle in the photograph shows a common problem. There is a kink in the axle where it is splined at the left-hand end. I’m very sure this is down to the manufacturing process, not damage in use, because it is such a consistent fault. In fairness, I have a couple of these Carette-made wagons in really excellent condition which I am sure have the wheel-sets that were fitted at the factory during manufacture. Holding these wagons in the air and turning the wheels by hand, there is a visible wobble on most wheels. However, the wagons run perfectly well. Sure, if you rest a finger on the roof and push the wagon along, there is a very slight regular rise and fall caused by the eccentricity of the wheels. But it is hardly noticeable. Somehow, the unevenness of the wheel castings, the bent axles and the out-of-true wheels cancel each other out and the wagon runs smoothly. For use on tinplate tracks, laid on the carpet, these Carette wheel-sets are more than good enough.

I still don’t like wobbly wheels. Very unrailway-like. So I straightened the axles.

The wheels themselves have six spokes and are commendably narrow — much ‘finer’ than the Bassett-Lowke wagon wheels made in the 1920s and ‘30s. As found today, the wheel castings generally appear the colour of lead. When new, I believe the wheels were black. I am not sure if the black coating was a chemical treatment or a thin coat of lacquer or similar, but on close examination traces of black are usually still present:

92C90139-A29F-4F19-B10F-E27FF9D8FDDF.jpeg

E75F4684-09DB-4CCE-9A40-8736CF3E9A57.jpeg

I think the black coating is/was paint that has not adhered well to the lead alloy. But compare, for example, the wheel rim and the spokes in the top photo. And the slightly depressed areas in the casting around the rim. Something was used I am pretty sure to colour the wheels black(ish). Occasionally, Carette wagon wheel-sets turn up with much more obviously black painted wheels. This paint might have been applied by the model’s owner. Or it could have been applied at the factory and survived exceptionally well. And not all wheel-sets were necessarily made the same. We will never know.

As I wanted two matching wheel-sets for my wagon, I used a thin wash of black paint on those wheels that had little black colouration left:

55026ADD-55EF-4D5A-99E2-D48AD29BDC57.jpeg

The near wheel on the right is ‘as found’. Very definitely it has a black coating. Both wheels on the left-hand wheel-set were given a wash of thinned black paint.

Wheels done. Wagon body next.
 

40057

Western Thunderer
A final bit of cleaning and fitted with its new wheels, my Carette-made wagon mentioned in my post #129:

37D7208B-A5BA-4DCF-92F1-7E6DE1A01F06.jpeg

4D66B400-D84D-4018-A04F-FD2B74F4956F.jpeg

A very nice model that exemplifies the best features of Carette’s wagons produced for Bassett-Lowke. It’s also in really astonishingly good condition. This wagon has the serial number 13428 - 35. Although introduced in 1909, this model was not offered in Gauge 2, just gauges 0 and 1.

Mineral wagons were under-represented in the Bassett-Lowke range of tinplate wagons. I guess the vast numbers of different private traders’ wagons, often operating in geographically restricted areas, presented a problem for choosing prototypes to model that would sell well enough to make them commercially viable. So Bassett-Lowke chose two railway-owned prototypes to include in its range of tinplate mineral wagons, one GNR (13423), the other MR, branded for loco coal (13433). The issue of which private trader’s wagons to model was avoided by opting for the fictitious livery ‘Bassett-Lowke’ (13413). But, additionally, a further fictitious mineral wagon was offered, ‘W. H. HULL & SON’ (13418). W. H. Hull & son was a large model shop in Birmingham that was a Bassett-Lowke stockist. Evidently, W. H. Hull were able to get agreement to the production of ‘their’ wagon, but what the financial arrangement was I have no idea. The Hull wagon was listed in the Bassett-Lowke catalogue, so it was not exclusively sold by the Birmingham shop. It is my belief that W. H. Hull were also behind the ‘City of Birmingham’ wagon illustrated above, and a further Birmingham Corporation wagon, a metal bodied hopper (13430). I have no documentary evidence for this. But Bassett-Lowke conspicuously avoided producing prototypical models of privately owned mineral wagons — except for the two Birmingham Corporation wagons. The ‘Hull’ wagon and two prototypical Birmingham wagons were not produced in Gauge 2 whereas nearly all the other wagons introduced at the same time were. And W. H. Hull was certainly advertising for the 1909 Christmas season the three Birmingham-based wagons, describing them as ‘novelties in scale model wagons’. So I think W. H. Hull in some way sponsored or underwrote production of all three wagons. Much as some large retailers do today.

I am very happy with the repair of my City of Birmingham wagon. I cleaned it and treated one area of rust with a phosphoric-acid-based rust remover. The corrosion was on the top corner of the wagon nearest the camera in the above photos. Most likely the wagon was kept in a box and that corner was in contact with the acidic cardboard, possibly for decades. After treating the rust, I covered the bare metal with an anti-rust black primer. It really doesn’t show. The wheels are true enough for the wagon to run smoothly with no ‘wobble’. However, that has now left me dis-satisfied with the previous repair I undertook on one of these Carette-made wagons. That wagon, an MR cattle van, runs with a distinct ‘limp’ due to the eccentricity of one of the wheel castings. At the time, I only had the four wheels, so the repair was the best possible, but I was never very happy with the result. I am now resolved on replacing the defective wheel-set.

The search for Carette wheels continues …
 

40057

Western Thunderer
The search for Carette wheels continues … with some success.

Just obtained from ‘a well-known internet auction site’, this sadly dilapidated MR loco coal wagon:

A194EDC5-BA9C-4FB1-A04A-57273A2CE2EF.jpeg

Well past rescue, I have bought it (less than £10) as a spares donor. Specifically, of course, I need the wheels. The drop-link on the far end coupling is likely useful too, as these go missing. The lithographed solebar overlays just might have a future use as these too sometimes become detached and are lost. They would of course only be appropriate for repairing an identical wagon — which I don’t have.

The above wagon is 1911 or later production. It has the expected cast lead wheels for a wagon of this date — almost certainly the wheels fitted at the factory, probably never removed in 113 years. Once again, rotating the wheels in their bearings reveals both axles to be slightly bent, with wheels correspondingly out of true. I really do think this is not damage in use, but is how they were when new. The axles are very badly rusted, so I will take the wheels off and use a couple of straightened, not rusty, spare axles to make useable wheel sets with wheels as true as the castings will allow.

All the window frames have now been fitted to the Benham’s warehouse:

5DB277EC-1545-459F-9A3B-9D0052A8CD1F.jpeg

The above photo shows the window frames that had not been fitted last time I posted a photograph of this building.

I need to apply a small amount of weathering so the appearance of the window frames is in keeping with the surrounding brick work.

After that, just a couple of railings needed to finish the building.
 

40057

Western Thunderer
Hurrah! The Benham’s Warehouse Building is finished. According to an earlier post in this thread, I had started work on it before 10 July last year. So less than a year to build. Just. In fairness to myself, quite a bit else has been done during the period the warehouse building has been under construction.

The last job, earlier today, was to fit the railings to the ends of the loading platform. This photo shows the last of the rails being pushed into place through the post:

E1C8FEC4-3FAB-4B67-B317-2C1BB104F65C.jpeg

The hole in the loading platform for the post was drilled before the platform was even attached to the front of the building. The holes for the rails in the brickwork were also drilled months ago. The post (stanchion) is turned brass, made by Caldercraft for model ships. The rails are 1 mm diameter nickel silver wire, chemically blackened. The circular wall fixings for the rails are 16 BA washers.

When finished, the railings look like this:

40958FD7-7CDA-4BD5-849B-2AAAF15A2717.jpeg

And the building looks like this:

9EB393F5-37C3-45E7-B97D-175E7E6F1EE2.jpeg
 

David Waite

Western Thunderer
Good on ya, you must be very pleased it looks wonderful I have thoroughly enjoyed watching the progress,
so what’s the next build on the agenda to keep me entertained .
David.
 

40057

Western Thunderer
Good on ya, you must be very pleased it looks wonderful I have thoroughly enjoyed watching the progress,
so what’s the next build on the agenda to keep me entertained .
David.
Thank you and good question.

Buildings-wise, I must get back to and finish the Benham’s factory building. I started it first, but realised I needed to make at least the structure of the north end of the adjoining warehouse, to ensure the two buildings would fit together, before going any further with the factory. Once started, I ended up just carrying on with building the warehouse.

I also want to prioritise getting the sidings in front of the Benham’s buildings finished, so the buildings can be put in place on the layout. The sidings were laid years ago, but at the time with no clear plan for the adjacent buildings. Indeed, at one stage the sidings were possibly going to be the carriage sidings. Now I know what will be around the sidings, two of them will have to be slightly shortened to accommodate the building on the north wall of the room. So a couple of track panels will have to be lifted. Also points repaired for the connection to the mainline.

Insofar as I have a plan, that’s it. But thank you again for your interest.
 

40057

Western Thunderer
In my post #14, I showed pictures of parts for the anti-plunge wall at the north end of the layout. Nearly all the parts are made, I said. Embarrassingly, that was last June, more than a year ago. Finally, the anti-plunge wall was actually finished this afternoon. It has been nearly done for months, but I was concentrating on the Benham’s warehouse and other things.

These views show both sides of the wall:

C08B2E6A-6C53-4FF9-9705-0BE37D3DC231.jpeg

CFEA69E0-15E9-47F7-8B48-D61BBA45A455.jpeg

I am happy with it except that it has taken far too long to build — because it is unnecessarily elaborate and over-engineered. The construction is all of wood except the coping between the piers which is MDF. The piers themselves are made from plywood strips laser cut with a brick pattern by Poppy’s Wood Tech. Construction and final painting necessarily took place in situ. All the small parts were fastened with moulding pins and glue and the wall is very firmly screwed to the face of the benching on which the railway is being built. It isn’t going to break, it will do its job and, yes, I do think it looks right for the layout.
 

40057

Western Thunderer
I suppose I have to admit that part of the attraction of trying to build a layout using vintage equipment — and of collecting old trains generally — is that it’s a treasure hunt. You just never know when or where that longed-for item or spare part will turn up, if you keep looking. And surprising things do surface in surprising places.

In my post #71, I described my Precursor tank — in really very good condition but missing its headlamps. As with nearly all locomotives of the period, when new its fittings included lamps indicating an express passenger train, like this:

401006B5-1330-41F7-9DDB-12EAFA91AE46.jpeg

(Photo by John Neale of a Marklin Precursor tank recently sold by ‘Stop the Drop’ internet auction. Reproduced with permission).

But look what I have found! In amongst a mixed lot of a few post-WW2 0 gauge items in an internet auction, an early Marklin headlamp:

0F83067D-6C16-43C7-BD96-84BA7661448D.jpeg

It could be from any 0 gauge Marklin LNWR locomotive (Experiment, Bowen-Cooke tank, Precursor, George the Fifth or Precursor tank), but it is exactly the type of lamp originally fitted to my Precursor tank. It’s easy enough to understand how the original lamps from my loco were lost. How though did this single lamp end up being sold in an internet auction with other much more recent 0 gauge equipment? And what were the chances of it being noticed by someone who had a locomotive needing exactly that kind of lamp?

If anyone has another similar lamp for sale, please PM me! I’m still looking for a second one.
 
Top