Latest activity
-
martin_wynne replied to the thread GWR Chairs.Phil's pictures of GWR switch and crossing chairs on Templot Club Resources at: GWR Switch and Crossing Chairs - photos A few of GWR... -
Not done BR(WR) but wouldn't take much.... -
Dog Star replied to the thread GWR Chairs.Chairs from my local foundry (read as "print shop") often include the mnemonic for the chair type so helping the budding track builder... -
Not done BR(WR) but wouldn't take much.... -
Show off! :))
-
Like this?
-
Thanks Graham, separate nuts/screw heads are of course easy to do. You’ve seen that I did some for Mike on t‘other channel, but my...
-
The rear-most shelf slat is bracing the display board, and the display board is holding the same slat straight and level. The other two...
-
Dog Star reacted to richard carr's post in the thread Richard's American Train Adventures with
Like.
After Pines Junction, I headed to Elkhart in case the local to the Elkhart and Western was running. Unfortunately it wasn't, there were... -
Dan Randall replied to the thread GWR Chairs.I’m guessing the date of manufacture is on the other side and that BR(W) chairs are also an option?… :) Regards Dan
-
Like this?
-
Like this?
-
daifly replied to the thread Garden railway in 16mm: Wilmington Light Railway.They’re called 4-way weathered around here. Dave
-
Back here in Part 3: The Heybridge Railway, 1889 to 1913 I use this cassette so much I forget it is non-standard. The length is as...
-
Dan Randall reacted to matto21's post in the thread Matt's workbench - current project: back to random modelling with Like.
Good afternoon and happy easter to you all. I'm having a short break from NG scratchbuilding at the moment, and have decided to turn my...