And no amount of sideways photos will fix the problems. Good to see you haven't been afflicted with the "I won't be losing any sleep over ....." disease which seems to be spreading through the hobby, even MRJ has been promoting the building of models which look nice but are fundamentally inaccurate. Personally I don't mind what people build for themselves but am frustrated by kits and rtr models that could be correct just as easily as incorrect - the difference is only in getting and interpreting the correct information before going into production.Am I going mad ! as you may know I have built four 7mm Sea lions and moaned about the kit being so old that had I known I would not have bought them WELL. I bought a Walrus kit this time the product says it very old and is not slot and tab. Fine I know what I'm buying it wasn't cheap £80 and yes its old fashioned but there are some very nice new casting. So the kit has been updated. There are a couple of things wrong there is no inner body but I can make that from plastic card as you have to with the old RJH Sea lions. I can also sort out the discharge units. BUT then I looked at the drawing in the kit that shows you where every thing goes ! The inside should be 27ft 6in 192.5mm but is 183mm and the overall length should be 32ft 6in 227.5mm and is 222mm. This tells me that this was a 4mm kit blown up to 7mm. So it was wrong in 4mm its now twice as wrong. I GIVE UP.