7mm Richards P48 US Thread

mickoo

Western Thunderer
A 9" thick slab seems a bit excessive for a shed unless you have a traction engine or a steam roller parked in there .
I was pulling your leg about jacking the slab up :)
We have soft ground here, previous thinner ones have all cracked.
 

richard carr

Western Thunderer
I did a bit more on freight cars at the weekend

First was decals for the Golden West boxcar

20250202_143238.jpg

20250202_143243.jpg

It always amazes me the difference a few decals make.

Then I did the gondola, it went a bit wrong

20250202_143258.jpg

Oh dear I lost a bit of the "O", the whole thing fell off in the water and getting back on to the paper sheet and onto the model just didn't go to well. The saving grace of course is that these often lost and worn away as they aged.

20250202_202119.jpg

I then started to weather the boxcar. The green is the right kind of colour but it needs to be faded. So I tried my mix of tamiya X21 flat base 20% paint 80% tamiya lacquer thinners.
I think it's working, it needs a second coat but I want to let this one dry thoroughly before I put the second coat on.

20250202_233642.jpg

20250202_233648.jpg

20250202_233657.jpg

I also use the tamiya mix on this tank car

20250202_143333.jpg

It needs to be a very thin coat as it goes white if you put too much on.
 
Top