7mm On Heather's Workbench - one final time, with feeling

Heather Kay

Western Thunderer
As you probably know I’ve decided to hang up the soldering iron and retire from professional building. It would be nice to say it was a hard decision, but I’d be lying. Over the last few years, and particularly since the Covid unpleasantness, I’ve found my overall interest in model railways has waned quite a bit. It’s no longer a subject I am particularly enthused about. Indeed, having ticked over one of those significant number birthdays, I felt it high time to devote more of myself to caring for Best Beloved, and working on my other interests and hobbies.

So, one more commission build beckons. I don’t expect to document it in gory detail. In fact, one of the builds is a JLTRT coach build that I’ve covered twice before already! The commission is for three JLTRT Great Western coaches, and I don’t expect there will be anything particularly out of the ordinary about the builds. Expect, therefore, only occasional updates on progress, or anything of particular interest should it arise.

IMG_4112.jpeg

The scene on my bench, as I begin to explore the boxes. It’s a somewhat bitter-sweet experience. Just Like The Real Thing, under the late Laurie Lynch, was what led me into the professional building game. Rummaging in each box turned up reminders of the company, and of Laurie, and in many ways what a hole their passing has left in the hobby.

To details, then. I have to build a C54 all third, C31 "toplight" all third, and an E85 "top light" composite. I've already been over my previous C54 builds to remind myself of the modifications required around the underframes. I need to research a bit deeper to see if the toplight kits suffer the same issues. Three different types of bogies will be deployed, and I am being expected to sprinkle some of my magic pixie dust about things to make them look the part in their 1930s liveries. I must admit I have some trepidation about the finishing stages, as previous builds for the client have been completed by Gerry Beale. That sets the bar very high indeed.

Sufficient wheelsets have been delivered from Matlock. With JLTRT no longer in the picture, I’ve dug through my spares for the odd thing that was missed during packing, and pored over a couple of supplier web sites for alternatives. There’s no real excuse not to make a start - but not today. There is time for some serious armchair modelling research first, though.
 

Heather Kay

Western Thunderer
Finally, I make a proper start.

IMG_4129.jpeg

My least favourite pastime (of many!): fettling brass castings. The buffers are being particularly naughty, but I’m slowly winning through.

Having been through my bits box, I selected some ABS LMS dynamo castings to replace the JLTRT efforts. They’re almost exactly right, and will look better under the coaches.

Back to the fettling.
 

Heather Kay

Western Thunderer
Oooh good! More interesting aircraft from your stack;)

I'm currently stuck converting a Lancaster into a Manchester. The resin parts are not a good fit, and it’s annoying me.

Having beaten the buffers into submission, attention turned to the underframes.

IMG_4131.jpeg

The "top light" coaches were built in the 1910s, presumably under the guidance of Mr Churchward. The vacuum brake system isn't the more familiar mirrored setup, as you can see from the vee-hanger arrangement. Having formed up the vees, I then spent a while carving away a little of the floor to get the etched parts to seat neatly. The outer vee also has to be joggled to clear the trusses, but there’s no guidance in the instructions. I worked out the cross-shaft trunnions needed to be 14mm from the floor, and beat the vees into submission.

IMG_4132.jpeg

The brake arrangements at the dynamo end seem to fit nicely. The cast cross-shaft fits with the cylinder.

IMG_4133.jpeg

The other end, though, reveals I’m going to need to do some fabrication work. The cross-shaft needs the inner lever to be the other way up, I assume. The outer lever also doesn’t match up to the cylinder - though the angle of the photo implies it’s just fine. It’s out by a couple of millimetres.

Ordinarily, I would enjoy dealing with stuff like this. It’s bread and butter for most modellers, after all. These days, such a problem is more likely to make me pack it all back into the box and go and do something else!

(I'm not going to do that. There are some useful extra parts I can use to sort this out.)
 
Last edited:

Heather Kay

Western Thunderer
Ah, bother.

IMG_4134.jpeg

I have elected to make a start on one of the top light coaches. You see those slots in the floor casting? I believe I am supposed to have cast blocks that fit in the slots, into which the bogie mounting screws go.

Both top lights seem to be missing these blocks. Of course, I’m working on an assumption here. The Collett kits do use the blocks - and the kit I have has the castings. It is possible, of course, that I won’t need castings for the top lights. I’ve read, and reread, the instructions for guidance, and there ain’t none.

I may have to get creative with the bogie mounting.

Meanwhile, I’ve been on to the inestimable Mr Bambrick of CPL to acquire some better bits and bobs. While I’d like to push at least one coach on as far as possible, I may be better served working to keep all three at more or less the same level.

It's been so long, I’ve forgotten how to do most of this!
 
Top