Issues with printers

[Marc Dobson]

I have a Saturn 8k which is giving me a little trouble. Took the vat off to check the light and found this.

Does anyone know what is going on? I have a feeling that it is a terminal issue!
Marc

 

[simond]

Don’t know if it’s relevant to yours but I replaced the front panel push switch on mine, and Mickoo wired his to eliminate the switch. Worth checking, as it’s cheap & easy.

Post in thread 'SimonD’s workbench'
SimonD’s workbench

 

[Marc Dobson]

Elegoo have suggested it could be a loose wire. It gets better as my anycubic M5s as stopped working at the same time.

 

[Marc Dobson]

Update on the printer saga.
Elegoo have seen the clip and have said it needs a new screen. That was the good news the bad was there isn't a stock of them in the UK so it will have to come from China.
The M5s which also decided to stop working at the same time is back up and running. Test print finished about half an hour ago. All good gave the build plate a tickle with some 200 grit wet and dry and increased the exposure time to 80sec on the base layers.
Marc