Free 3D Models for download from the Great Northern Railway Society
- Thread starter Mike Trice
- Start date
-
- Tags
- 3d printing free gnr stl
Mike Trice
Western Thunderer
I have put up a new 3D model on the GNRS website (GNR Director’s Saloon (D14) – The Great Northern Railway Society). The model represents the GNR Director's Saloon which can be printed in original condition as built by the GNR or as refurbished and preserved on the Bluebell Railway:
The model above was printed on an Anycubic Mono X resin printer, orientated at 25 degrees on the Z axis and parallel to the build plate. At 25 degrees it just fits on my build plate (with some clipping of the support rafts) and reduces considerably any stepping. The model has been given a single spray coat of Autotek Filler Primer.
The model is supplied as a kit of parts with individual parts being capable or being orientated to suit your printer.
The printed model has had the ends, sides, roof and all partitions combined into a single unit with the underframe being printed separately.
The model above was printed on an Anycubic Mono X resin printer, orientated at 25 degrees on the Z axis and parallel to the build plate. At 25 degrees it just fits on my build plate (with some clipping of the support rafts) and reduces considerably any stepping. The model has been given a single spray coat of Autotek Filler Primer.
The model is supplied as a kit of parts with individual parts being capable or being orientated to suit your printer.
The printed model has had the ends, sides, roof and all partitions combined into a single unit with the underframe being printed separately.
Last edited: