Metropolitan Westinghouse OO Gauge

[Jarmstro]

I agree, I've trawled all of my Met and LT books and any information is a bit vague when it comes to whether all of the Westinghouse and BTH locos were 'reconstructed' and withdrawal or scrapping dates. We do know one Westinghouse loco and one BTH loco were reconstructed in 1919 and after these two it was it was decided to construct twenty new locomotives. The BTH electrical equipment was removed and used in multiple units. Both the Westinghouse and BTH locos had gone by 1922/1923 once the Metropolitan Vickers locos were in service.

When I was researching the Met Bo-Bo for my 7mm model I did notice two different rivet patterns on the solebar depending upon the loco number which I think may indicate either a reconstructed or new chassis.

The line from Harrow to Watford and Rickmansworth was electrified in 1925, Rickmansworth to Amersham and Chesham in 1960-62.



Then onto the electric multiple units . 1913 stock, etc, etc

I've recently retired and may well treat myself if I can find some one who would take on a commission to build an 00 gauge basic and condensed layout (just the track work) of Ricky circa late 1920's. I don't enjoy baseboard building and track laying myself. Then any EMUs and my electric locos won't look so ridiculous!

 

[Jarmstro]

A 3D print for a Class C. I'm going to have to scratch build a chassis for this one. It's a winter job and requires patience. Inside cylinders so wont be too bad but I need the melancholy of winter in order to do it. It'll have to wait.. (The Rapido E chassis doesn't fit.)

 

[Yorkshire Dave]

A 3D print for a Class C. I'm going to have to scratch build a chassis for this one. It's a winter job and requires patience. Inside cylinders so wont be too bad but I need the melancholy of winter in order to do it. It'll have to wait.. (The Rapido E chassis doesn't fit.)

I suspect it's the boiler pitch. I very much doubt the Hornby SECR H chassis would fit, again due to the boiler pitch.

 

[Jarmstro]

I suspect it's the boiler pitch. I very much doubt the Hornby SECR H chassis would fit, again due to the boiler pitch.

It doesn't matter. I'll enjoy making the chassis.



I've made many and my mantra, which I need to remember and so should everyone, is to make the coupling rods first!

 

[Yorkshire Dave]

I've recently retired and may well treat myself if I can find some one who would take on a commission to build an 00 gauge basic and condensed layout (just the track work) of Ricky circa late 1920's. I don't enjoy baseboard building and track laying myself. Then any EMUs and my electric locos won't look so ridiculous!

Belated congratulations on retirement. I myself retired 6 months ago.

If you have the space why not model a slice of Neasden - Met steam and electrics plus you can also throw in the GC as well!

Then, because I was brought up in Chorleywood the Met piqued my interest but of course I never knew anything other than A stock and BR 115's for going to school in Watford or up to London. One of my abiding memories is the amazingly hard, scratchy and prickly upholstery on the 115's.! As a school kid in shorts it wasn't nice! What I just can't remember is how much a ticket was to Watford or Baker St? It must have been peanuts.

I recall when we first moved to Aylesbury in the early 1970s the return fare to Marylebone was 75 pence. How times have changed as an off-peak return is now £29.40.

Like yourself I remember the BR 115s and the days when they used to stop at Moor Park which is not the case now. And on Sundays when you had to change at Amersham onto an A stock Baker Street train. I also managed to visit both Baker Street (Met) and Harrow signal boxes way back in the late 1970s. I do pick up occasional titbits about (including the friction between) the Met (TfL) and Chiltern Line as my sister is a signaller at Marylebone.

The bay platform and yard at Aylesbury is now the car park.


And A stock approaching platform 3 at Harrow on the Hill on an Uxbridge service - I somehow caught the arcing.