Ressaldar
Western Thunderer
Today I have installed the windows in the cabs, I was a bit apprehensive about this as I was convinced that despite them being laser cut, there would still be a lot of filing to be done. To say that they fell in would almost be an understatement as all that was needed file wise was on the miniscule pips which were left after removing them from the sheet. Glue and Glaze canopy glue was used around the edges . Any blobs that may have strayed onto the windows will be removed once it has hardened.
and I also recruited a driver from Modelu - no names but he is on here and no doubt blushes every time he logs on!
so it is definitely the lights next and then the cabs can be fitted and any joint remedials carried out prior to the painting.
Still forgot the photo of the weights, next time for sure.
regards
Mike
and I also recruited a driver from Modelu - no names but he is on here and no doubt blushes every time he logs on!
so it is definitely the lights next and then the cabs can be fitted and any joint remedials carried out prior to the painting.
Still forgot the photo of the weights, next time for sure.
regards
Mike