Seem to of got on quite well with the body. The boiler is not fixed as yet as the smoke box and firebox both need finishing. I'm making a new smoke box wrapper at the moment, the original wash destroyed taking it apart.
One bit that is puzzling me are the cab sides the ones I took off are to short. They are about 2mm shy of reaching the front sheet. I've put everything in the places marked. Everything else fits nicely. So not sure what the previous owner had done differently. But now have made new ones.
Just one side fitted so far. I got side tracked with the smoke box, and fitting some of the cab interior before the hole got to small.
I'm struggling to keep the brass clean, but often have this on kits that have been striped down. As you can probably see the cab floor had been butchered by the previous, more than likely to fit in an undersized cab.
Hopefully more soon. Will be a little slower as there are replacement parts to be made from now on in.