iploffy said:And so the saga continues
Dug a big hole and buried it SERIOUSLY as part of the garden is over some old sand workings I got a builder friend of mine to ok the type of sand that was being dug out and used it in the concrete for some of the non load bearing footings and then whacked what was left in the hole the remainder went to a friends house to fill up a crater (ex fish pond) hard work but worth it28ten said::shock: :shock: thats some earthworks, what are you doing with the muck you have dug out?
At the moment I am using a normal Duette controller but I have put in place a ring main carrying traction power under the boards and these are connected via droppers to the rails so add to that I am using copper house wire with a cross surface area of 2.5mm it should theoretically negating current losses so enabelling me to use lower current controllers. Well thats the theory anywaywesternfan said:Well done Ian . Good to see how the ground work is done, what ampage is your controller
At the moment I am using a normal Duette controller but I have put in place a ring main carrying traction power under the boards and these are connected via droppers to the rails so add to that I am using copper house wire with a cross surface area of 2.5mm it should theoretically negating current losses so enabelling me to use lower current controllers. Well thats the theory anywayiploffy said:[quote=""westernfan"":202nxgz7]Well done Ian . Good to see how the ground work is done, what ampage is your controller
At the moment I am using a normal Duette controller but I have put in place a ring main carrying traction power under the boards and these are connected via droppers to the rails so add to that I am using copper house wire with a cross surface area of 2.5mm it should theoretically negating current losses so enabelling me to use lower current controllers. Well thats the theory anywayPhill Dyson said:[quote=""iploffy"":1wudtb9b][quote=""westernfan"":1wudtb9b]Well done Ian . Good to see how the ground work is done, what ampage is your controller
lancer1027 said:Hi Ian, i love it . How long has it took you roughly to get to this point ?. Also about your shed, have you insulated it ? and if so how have you done it ?. Sorry for all the questions it's just i'm trying to get as much info about sheds before i start mine.
Rob :wave: