OzzyO
Western Thunderer
Hello all,
the last update on the new hold & fold,
I forgot to do this step last time I was making the clamps,
Cleaning up the tabs on the edge of the top channel.
This is what I was using to clean the tabs off, a 400 grit diamond hard rubber block, that's really used for cleaning the edge of ceramic tiles.
D.J.P. recommends to scribe along the fold lines for the top channel, I'm going to use one of these that I got from Temu for £1.89 and 10 new blades for £1.70, the diamond sanding block was £3.48.
On with the sides.
ATB
OzzyO.
the last update on the new hold & fold,
I forgot to do this step last time I was making the clamps,
Cleaning up the tabs on the edge of the top channel.
This is what I was using to clean the tabs off, a 400 grit diamond hard rubber block, that's really used for cleaning the edge of ceramic tiles.
D.J.P. recommends to scribe along the fold lines for the top channel, I'm going to use one of these that I got from Temu for £1.89 and 10 new blades for £1.70, the diamond sanding block was £3.48.
On with the sides.
ATB
OzzyO.