Stuart Birks
Active Member
Having decided to replace the Superquick church in my village scene I spent a long time looking for a "typical" church. There is no such thing so I just had to find something that was about the right size and not too fancy to make it hard to build. In the end I found the church of Thomas A Becket in Pylle, Somerset. It was the right size and importantly within driving distance to take some photographs.
I didnt fancy making all the windows so decided to have a go at making a mould and casting them. I made a test window and it worked well.
This is the master window.
And this is the silicon mould taken from it.
I made a small test piece of wall and it looks ok.
It might look a bit rough here but it is only 36mm high. The glazing was just printed from the computer.
Stuart
I didnt fancy making all the windows so decided to have a go at making a mould and casting them. I made a test window and it worked well.
This is the master window.
And this is the silicon mould taken from it.
I made a small test piece of wall and it looks ok.
It might look a bit rough here but it is only 36mm high. The glazing was just printed from the computer.
Stuart