4mm West Halton Sidings

James

Western Thunderer
Despite my recent dabbling with 7mm, this is still my main project. A little slice of North Lincolnshire that most people have never heard of! It'll be going in the garage, which we're busy converting - well, it's been cleared of six years' worth of rubbish and materials are in hand! :D All being well, actual baseboards should be in there later in the year!

I have a habit of coming up with all sorts of schemes and often I can move from one idea to the next very quickly but a scheme based around the steel industry in North Lincolnshire was one I came back to again and again. A lot of my interest in this area comes from personal experience. One of the first experiences of the industrial side was when I was about ten and my Dad arranged a cab ride from Flixborough Wharf to Dragonby/Normanby Park Sidings - my Dad knew the manager at Flixborough Wharf through work! Later on through work I ended up being based in Scunthorpe a couple of times, including nine months on p-way at Scunthorpe Steelworks -

6357366941_31e8622f34_b.jpgCorus 78 at Scunthorpe Steelworks by JamesWells, on Flickr

6349378499_1c8e911280_b.jpgCorus No. 51 by JamesWells, on Flickr

As a little bit of background, the North Lindsey Light Railway was a line which ran from Scunthorpe up towards the south bank of the River Humber. Its primary purpose was the transportation of ironstone from the mines north of Scunthorpe to the towns various blast furnaces. It was only the low price of foreign ore which ended the line's involvement with this part of the local industry - local ore was rather lean but had the advantage of being self fluxing but cost is a major consideration and so in the 1980s iron traffic on the line ceased. Now the line remains to serve Flixborough Wharf where some steel is exported and serving Roxby where rubbish is taken to be buried deep within old ironstone mines.

This operation was itself fascinating with industrial locos running alongside mainline locos in places! Only when the line was near Scunthorpe itself did the private railway break away to head directly into the heart of the works at Appleby-Frodingham. Once upon a time immaculate steam locos from the Ore Mining Branch headed these ore trains. However this is all gone now, though the loco shed for the Ore branch locos is still extant, albeit no longer rail connected. It was just a shame that the old water tower succumbed a couple of years back.

I'm quite sure that my interests in industrial railways and railways in and around Scunthorpe has been reasonably obvious to anyone who's followed my blog so it probably comes as no surprise that the area has provided me with a lot of inspiration over the last few years, and beyond too. And no doubt it will come as no surprise for many to learn that a layout based in, and inspired by, the area is very much on the cards. And this is how the idea for West Halton Sidings came about...

5909183391_314fd27484_z.jpg
Normanby Park North 2 by Tilt Cab Man, on Flickr

My proposed layout draws huge inspiration from my time in Scunthorpe and a couple of childhood memories - it also manages to combine both mainline trains and industrial workings. It will be set around 1992; sadly I think wanting to model things and times I remember from my childhood is a sign of getting old! At the heart of the model is a further steelworks in the Scunthorpe area. I'm assuming that another works was built by the Trent near Alkborough allowing a couple of BSC locos to visit the exchange sidings!

An extra works isn’t as daft as it seems – the Scunthorpe area has seen around ten different works at different times! It would be well placed to make the most of local ore and provide a location for a wharf for supplying by barge or sea. The included maps should give an idea of the location. If you look on Google Maps there is an area which looks like it is abandoned industrial land – as far as I know it’s just marshy waste ground and has been for a long time! A small connection to the North Lindsey Light Railway would sort things out.

Flixborough427a.jpg

One thing which has really influenced the choice of location is something which happened about seventeen years ago. When I was about ten, my Dad arranged for a cab ride on the Flixborough Wharf branch - through his work he knew most senior managers of any large companies in the local area and knew the guy who then ran Flixborough Wharf and the result was a cab ride on the class 20 they had at the time!

Flixborough424a.jpg

We went from the Wharf up to Dragonby Sidings having first reversed half way along - this kick back was removed a few years ago, it was a a result of the original lines around Normanby Park Steelworks but had lasted long after the works closed in 1981. The driver and shunter were both ex-BR and lovely to me. The whole experience is a memory I will treasure forever! Although I've had numerous cab rides since through work (including the ECML, countless tampers and hitching a ride with the odd freight!) this memory is particularly special.

ProposedRoutes-1.jpg

The location map shows possible routes for rail traffic. The red shows the approximate route of the NLLR; the green is my chosen route in. It goes to the centre of the site and I think it makes the best choice of route given the drop from the exchange sidings to the River level. Sidings near Whitton look more logical but that section of the NLLR would have struggled to cope with the steelworks' level of traffic. It was really a light railway there – whereas up to West Halton the NLLR was anything but a light railway! I do think the plan is quite plausible and would provide a nice operation for BSC locos complete with BR locos. My assumption is that like Skinningrove it no longer casts its own steel and receives blooms from App-Frod works. Skinningrove lost its furnaces in the seventies I think – Alkborough, I’m thinking, would have lost theirs in the eighties, after Normanby Park Works had closed with iron/steel production being concentrated at the main Scunthorpe site.

Just how to translate all of this into a layout isn't the easiest task. First of all it's grown from a small layout which could have been easily left up at home into a much larger exhibition orientated project - the scenic section will fill one side of the garage not the fiddle yards will be an exhibition only addition. Not a bad thing as I think the extra room will help with a feeling of 'openness' whilst allowing the yard to appear like its best years were some time ago, with plenty of spare land around it.

Plan7a-1.jpg

So this is where I have got to currently - operation will be very simple as essentially is just the exchange of wagons between the works and the main line. It should be a simple task with a decent amount of space available but resisting the temptation to enlarge the yard and add more sidings has been hard. It has however, allowed me to incorporate a couple of things which, for me, are very much a part of the industrial railway side of Scunthorpe.

043-Corus-Scunthorpe-_69_--.jpg

The rather un-British looking Control Towers which regulate traffic around the site, although not all are now in use. The rather angular, austere looks do have a certain charm within the context of their environment and to regulate the traffic between the exchange sidings and the works an example seems ideal! Out on the mainline an ex-Great Central Railway signalbox will be perfectly in character for the line and a lovely opportunity for a slightly run down structure displaying a make do and mend approach to its maintenance.

Hopefully, and I'm being very optimistic and hopeful, construction can begin properly later in the year. In the mean time stock is beginning to take shape :)
 

Attachments

  • 6357366941_31e8622f34_b.jpg
    6357366941_31e8622f34_b.jpg
    533.2 KB · Views: 0
  • 6349378499_1c8e911280_b.jpg
    6349378499_1c8e911280_b.jpg
    465.4 KB · Views: 0
  • 5909183391_314fd27484_z.jpg
    5909183391_314fd27484_z.jpg
    87.4 KB · Views: 0
  • Flixborough427a.jpg
    Flixborough427a.jpg
    56.1 KB · Views: 0
  • Flixborough424a.jpg
    Flixborough424a.jpg
    57.9 KB · Views: 0
  • ProposedRoutes-1.jpg
    ProposedRoutes-1.jpg
    75.6 KB · Views: 0
  • 043-Corus-Scunthorpe-_69_--.jpg
    043-Corus-Scunthorpe-_69_--.jpg
    78.4 KB · Views: 0

SimonT

Western Thunderer
James,
very interesting. I look forward to seeing progress. Remember - Less is More!
All the best

Simon
 

Broad Sword

Western Thunderer
Looks like you have found yourself a worth while project there James. I wish you well. Please keep the boys down in the shed informed.
 
Top