4mm Cwm Prysor - Modelling the Bala-Blaenau Ffestiniog Branch

7428 84J

Active Member
Hello all

I'm currently in the process of building my first proper layout, and first exhibition layout, Cwm Prysor. Although relatively small at 10ft in length, it will be part of a home layout extending the line across the Viaduct and along the mountain side.

The Boards were laser cut by Tim Horn. SMP track was used on the straights, while the siding used S4 Society sleepers. The turnout had some help on the vees from Andy Cooper.

IMG_2891.jpg

_MG_8524.jpg
 
Last edited:

7428 84J

Active Member
Some examples of stock.
The Blaenau Branch's motive power was in the hands of tank engines, primarily the 57XX, 74XX and 58XX.

7428 (a firm favourite of mine you may have guessed) was produced using the bachmann 64XX as a basis. I currently have made three 74s from this method, and intend to do 7403 next. 7431, another one of mine was the basis of an article I wrote on the conversion in Railway Modeller earlier in the year.

_MG_8498.jpg

Some examples of goods stock, a 16T and two exPOs

_MG_8489.jpg

_MG_8500.jpg

Finally, two vans I've recently finished, two older diagram LMS vans built from Cambrian kits.

_MG_8566.jpg

Cheers
 

7428 84J

Active Member
Welcome along, look forward to seeing your updates
Steve

Cheers Steve, I'm getting there.... ;)

Definitely inspirational !

JB.

That is most kind. I'm still learning and trying new ideas. This will be the first time I've properly wired a layout (Lenz DCC) so I'm taking it relatively steady. My intentions are to get it wired, the point finished (and trap) by the end of August, before moving onto landscaping and scenics. First Show is October 2017 (Hartlepool).
 

7428 84J

Active Member
The presentation of the layout looks incredibly sharp from the outset.

Thanks Neil. I had a good idea of how I wanted the layout to look and did several rough sketches which Tim turned into the basic layout.
 

7428 84J

Active Member
One of the appeals of this line (as someone new to building stock) was that trains were made up of either one, to two coaches.

4645 is seen where eventually the platform and station house at Cwm Prysor will be situated, with polystyrene temporarily in place (partly unformed). The coach isn't strictly the correct diagram, being an E147 (E157 and E167 Brake Comps were the most common coach in the late 50s).

_MG_8528.jpg
 

Scale7JB

Western Thunderer
I still have this little devil on my left shoulder that says I should be building myself a micro layout/demonstration track in Scale7, and this thread really isn't helping..

JB.
 

FiftyFourA

Western Thunderer
As a dyed in the wool NE/LNER/BR NE Region man I have to admit that the modelling on this layout is excellent and I will follow it's progress with interest. Incidentally, I really like your weathering - understated so that it looks 'just right'. I also think you should pester JB so that he starts his S7 micro layout :D. In the meantime I look forward to your next post and seeing it in the flesh at Hartlepool next year as it's just down the road from me.
 

adrian

Flying Squad
I'm currently in the process of building my first proper layout, and first exhibition layout, Cwm Prysor. Although relatively small at 10ft in length, it will be part of a home layout extending the line across the Viaduct and along the mountain side.
Welcome to the forum and a great start. We went to Black Rock Sands, Porthmadog camping at half term and we drove back that route, up the valley and over in to Bala. Stunning scenery with the old railway line carved in to the side of the hill it must have been spectacular. So I will be interested to see how this develops.
 

Dan Randall

Western Thunderer
I still have this little devil on my left shoulder that says I should be building myself a micro layout/demonstration track in Scale7, and this thread really isn't helping..

JB.


Go for it JB - It's the perfect excuse to build and run those Western Region locos you so desire! :thumbs:

(Welcome to WT by the way Tom).


Regards

Dan
 

Dog Star

Western Thunderer
... We went to Black Rock Sands ... camping...
Now that is a memory jogger - just about 60 years. I recall making camp on the side of a hill and then cutting drainage ditches above and to the side of the tent. Pitching a tent in the rain... a 12' ridge tent with a fly sheet on a separate ridge pole giving us cover at either end of the tent. The fly sheet was put up first, using the top ridge, and then the tent was suspended from the lower ridge so that we could erect and take down the main tent in the (almost) dry.
 

7428 84J

Active Member
A couple of items of rolling stock I'm currently working on.
LMS dia 2108, produced from the sides and chassis of an LMS fruit van, and ends of a ratio van, following the method of Ian Fleming and Jim Smith-Wright.

_MG_8578.jpg

Freight on the branch in the late 50s is rather interesting. Bogie Bolsters, Pipe and Tubes all being common for carrying materials for the building of Trawsfynydd Power Station.

Another familiar item of rolling stock on the line, was Presflo traffic which was, again being transported for the building of the Nuclear Power Station, but was also used for transportation down to Blaenau Ffestiniog for the Hydroelectric dam above Tanygrisiau.

_MG_8579.jpg

Replacement buffers, and transfers from cambridge custom transfers (I've a photo showing the small portland cement logo on a presflo on the branch.)
 

7428 84J

Active Member
Yes, now you mention it, it is a very interesting period to model that area!

JB.

Very much so. I've been in touch with an ex signalman, and he commented on the amount of Bogie Bolster's on the branch in the late 1950s.

Here's a photo of Ben Brooksbank, (used through creative commons act). I think this is 9669 and gives an example of the passenger trains in this period, but you will see the two Presflos in the siding, for use on the Stwlan Dam high above Tanygrisiau. Both coaches in this photograph, I believe are Hawksworth E167 Brake Composites.

1863519_25ee3290.jpg
 

Ressaldar

Western Thunderer
HI Tom,

welcome to WT, you have certainly got off in the preferred manner - lots of photos:thumbs::thumbs::thumbs: I look forward to future postings.

cheers

Mike
 

iak63

Western Thunderer
Splendid to see this project here abouts.
Great stuff Tom and all power to your elbow...
 
Top