Adams T3

Discussion in 'G1/32' started by Thirtysecond, 18 January 2019.

  1. Thirtysecond

    Thirtysecond Western Thunderer

    The next big project has just started. Chris Tolhurst and I are building an Adams T3 each. Let's face it; one of the most beautiful locomotives EVER!

    They will be in 1/32, have scale working cabs and be dual fired, coal and meths.


    The first thing to do with any build like this is get hold of works drawings and this I have now done. Mark Wood is doing patterns for the wheelset in 1/32.


    Chris has now started transcribing the GA measurements into the many CAD files necessary for definition of laser cuts, design of motion work etc.


    Before we get to that stage however, loads of mundane items can be cut, milled, drilled and tapped. These include axle and hand pumps, stretchers, non-return valves etc.

    If anybody is interested I will post occasionally with updates.
    Last edited: 19 January 2019
  2. Steph Dale

    Steph Dale Western Thunderer

    Hmm. If the wheels are being done, I'll have to see if our kit could be blown up. I could fancy a T3 in 1:32...

    It'll be interesting to see one of the inspirational Tolhurst models take shape; I look forward to watching your progress.

    Peter Cross and Dikitriki like this.
  3. Dikitriki

    Dikitriki Flying Squad

    Please sir, please sir, can I do the test build?
    Peter Cross and Rob Pulham like this.
  4. Steph Dale

    Steph Dale Western Thunderer

    Nope. :D

    john lewsey, 3 LINK and Rob Pulham like this.
  5. Thirtysecond

    Thirtysecond Western Thunderer

    After conversations with Mark Woods I reckon we will get the wheel castings around summertime 2019.
  6. Thirtysecond

    Thirtysecond Western Thunderer

    Picking up the Mark Wood wheel castings this week so doubtless Chris and I will start machining on Thursday.

    Also boiler now designed, so that building those will also be a priority: fullsizeoutput_707.jpeg
  7. Mike W

    Mike W Western Thunderer

    I don't model G1 at all, but yes please, very interested. Don't think I have heard of dual firing before, which is also interesting.

  8. Peter Cross

    Peter Cross Western Thunderer

    Do they blow up to 1/32?
  9. David Halfpenny

    David Halfpenny Western Thunderer

    Oh yes, Mike, it goes back at least to the Mamod Steam Railway, where the two fuels were used simultaneous, being 'solid alcohol' tablets heaped high with spent matches ;-)
    Thirtysecond and Pencarrow like this.
  10. Steph Dale

    Steph Dale Western Thunderer

    Not easily, no. Doesn't mean they can't be though.

  11. SimonT

    SimonT Western Thunderer

    I thought we had agreed not to open the 1/32 box.:rolleyes:
  12. Mike W

    Mike W Western Thunderer

    But perhaps it would blow up to 1:22.6?
    Rob R and Jon Nazareth like this.
  13. Steph Dale

    Steph Dale Western Thunderer

    One reason the answer was 'not easily'... :D

  14. Thirtysecond

    Thirtysecond Western Thunderer

    Mark Wood wheelsets have arrived. This is the first time I have turned wheels (admittedly under the watchful eye of the master, Chris Tolhurst). Its a surprisingly time consuming business. It took a whole day to face off and put in a holding step for 50 wheels. Only one casting with an air hole presented any problems. I let Chris sort that out!!

    IMG_2700.JPG IMG_2698.JPG On Monday we shall hope to finish them off!!
    IMG_2697.JPG IMG_2697.JPG
    P A D, 2mm Dabbler, AJC and 13 others like this.
  15. David Halfpenny

    David Halfpenny Western Thunderer

    Hmm, air holes - until 1880, I understand people used Beaumont's Egg.

    Actually, given there's such a thing as a Learning Curve, I think you've made good going :)

  16. Ian@StEnochs

    Ian@StEnochs Western Thunderer

    Yes used extensively in faulty castings on the original Tay bridge!

    I have successfully filled blow holes in wheel castings, 7mm scale, with a mixture of cast iron fillings and epoxy resin. The filings came from the casting spigot on one of the casts mixed to a butter like consistency with Araldite original. I warmed the wheel and pushed the paste into the void, the heat making it runny and easier to stuff in. When fully cured I turned and profiled the wheel as normal and despite the hole being on the tread it is invisible and still running today.

    2mm Dabbler, AJC and Stirling O like this.
  17. Thirtysecond

    Thirtysecond Western Thunderer

    More wheel turning today. Almost finished the 50+ wheels!

    Also took time to drill and tap some temporary frames and end stretchers. These disposable Brass frames will be used for working out where all the mounting holes need to be placed (cylinders, horns, smokebox saddle. brake hangers etc). The actual frames will be in laser cut Steel. There's hardly a straight line on these frames and I do wonder how they marked up and cut out such complex shapes of full size frames in the 1890's.

    There are some difficult design decisions to be made which the temp frames will help with when all the "bits" are mounted. In its earliest form the locomotive had piston tails AND splashers on the bogie wheels. Those would be lovely to reproduce in miniature but because of the G1MRA back to back standard it limits the radii that can be accommodated before splashers hit piston tail. It may be we have to go with one or the other but that would be a shame if we can possibly get around the problem!


    Last edited: 28 May 2019
  18. Thirtysecond

    Thirtysecond Western Thunderer

    Prototype frames now have wheels and cylinders. We've decided to build a working prototype as clearances and the amount of "stuff" to get into available space is going to be critical. Note the cylinders are just in "block" form and are still to be properly profiled.

    Tim Watson, AJC, Jon Nazareth and 6 others like this.