A Garden Railway Pipedream: the odyssey continues

Discussion in 'Layout Progress' started by Dikitriki, 7 August 2013.

Tags:
  1. Scale7JB

    Scale7JB Western Thunderer

    That's going to be marvellous!

    Look forward to hopefully seeing it when it's up and running one day..

    JB.
     
  2. Dikitriki

    Dikitriki Flying Squad

    Hi JB,

    Not only seeing it, but bringing something to run on it:)

    Richard
     
    isambardme likes this.
  3. Scale7JB

    Scale7JB Western Thunderer

    I'd best start now...

    I'm sure it's been mentioned previously, but will this be strictly standard gauge, or all welcome..?

    I could really fancy something coal fired and narrow gauge..

    JB.
     
  4. Dikitriki

    Dikitriki Flying Squad

    No, all welcome. Our interest is standard gauge, but the circuit has been designed to cater for nearly anything that runs on 45mm gauge. The track centres are at 160mm the width of the boards is 320mm, and there is going to be sufficient height clearance to allow for narrow gauge outline. Lady Dikitriki favours narrow gauge, and I really like the more accurate models - Aristocraft L&B and IOM, Roundhouse Beddgelert, Darjeeling B and Taliesin.

    There will be a proper steam up area to allow for the live steam enthusiasts, and DCC track power (switchable).

    Richard
     
    3 LINK and Dog Star like this.
  5. Scale7JB

    Scale7JB Western Thunderer

  6. Neil

    Neil Western Thunderer

    I'm impressed by the support structure Richard. It looks quite sculptural, and while it's an obvious presence in the garden, its slenderness and delicacy have an attractive quality, like good modern bridges do.
     
  7. Dikitriki

    Dikitriki Flying Squad

    Thank you Neil,

    I am still of the opinion though that it is going to need substantial work to make the railway part of the garden. That will be next year's task. This year's is to get the infrastructure complete so we can see where we are, and make plans for the earthworks accordingly. I have had to bribe my wife with a reasonably substantial water feature so at least one big hole is involved.

    We were fortunate on Wednesday to get a pretty full day in, despite lowering skies. It was a bit windy and drizzly in places but our enthusiasm was undimmed (wasn't it?)

    We managed to get through ash tree corner with the same pole and jack process, so that means that there will be no concrete substructure at any point, and the layout will be height adjustable all way round.

    P1010390a.jpg

    And we fitted another couple of top boards, having worked out how to speed up the process.

    P1010392a.jpg

    I'm standing just to the right of the planned steaming up area in the last photo.

    Richard
     
    isambardme, Neil, 7mmMick and 8 others like this.
  8. Dikitriki

    Dikitriki Flying Squad

    PS, I know I've won, my wife was looking at my screen (as we queue on line for some Harry Potter play tickets) and saw the above post.....'that's our railway'.... Yes:):)

    Richard
     
  9. adrian

    adrian Flying Squad

    Result!:thumbs: Although it's a good job there was no washing out in that last photo otherwise I think the comment might have been slightly different!
     
    Jordan likes this.
  10. oldravendale

    oldravendale Western Thunderer

    I suspect you wont regret the pond either, Richard! We had a substantial one at our last property and kept some huge carp. Regrettably we were plagued in the last couple of years by herons and any protection I've found is rather ugly to a greater or lesser extent, although essential. It's worth considering this aspect in the design, and also avoid any accidental enriching of the water with nutrients, or you'll never get rid of the blanket weed!

    Oh yes - and the layout is looking good too!

    B
     
  11. Ian G

    Ian G Western Thunderer

    I have thought about 2 ponds linked by a channel for a canal.

    Ian G
     
  12. dibateg

    dibateg Western Thunderer

    It will be interesting to see what happens when the live steamers spit out some sparks and sets fire to Linda's washing!....
     
    isambardme and 3 LINK like this.
  13. oldravendale

    oldravendale Western Thunderer

    .....that's what the pond is for......

    B
     
    Dan Randall likes this.
  14. Dikitriki

    Dikitriki Flying Squad

    Hi,

    Back off my hols and a day in the garden with the gang. We made some progress with the top boards getting all the way round one of the beds (photos tomorrow), but also - for encouragement purposes only you understand - placed a couple of metres of track on the boards and put a loco on them.......only to see what it looked like......

    P1010416a.jpg
    P1010418a.jpg
    P1010419a.jpg

    Can't wait to see things running:)

    Richard
     
  15. Scale7JB

    Scale7JB Western Thunderer

    I should imagine it will be strictly no live steam when the DB's are out to play..!

    JB.
     
  16. Dikitriki

    Dikitriki Flying Squad

    JB, you're probably right there. Mind you, I kicked all this off with my live steam BR44, so my 44 with 15 bogie ore hoppers will feature:)

    The promised photos of progress:

    P1010423a.jpg

    P1010424a.jpg

    The transition curve needs a little work to make the baseboard edges less straight, but other than that, we are happy with progress.

    Richard
     
  17. Dikitriki

    Dikitriki Flying Squad

    Live from a very wet Shropshire.......

    Rain stopped play?

    Not a chance:D

    P1010441a.jpg

    P1010442a.jpg

    P1010443a.jpg

    Richard
     
  18. Mr Grumpy

    Mr Grumpy Western Thunderer

    That's what I call a dedicated work force..... no tea and bickies to be seen :D
     
  19. Dikitriki

    Dikitriki Flying Squad

    The following pics show todays' progress, which was very good despite the weather. Although to be fair it got a lot better after lunch, even bright and sunny for a brief spell.

    The first pic is heading towards ash tree curve. We decided that we would get a better transition curve by cutting the three relevant boards in situ, so they have been left straight. We hope to finish that off on Wednesday.

    P1010444a.jpg

    The second pic shows where we have got to ground level with the boards on the curve past the first bed. This is the curve that has to be set out by templates as we weren't able to get a radius marker in the bed. We can now carry on with the support poles and move round the bed section by section.

    P1010445a.jpg

    We have also smoothed out the rather too straight section of the transition curve.

    This is about 19m of top board, almost 1/3 of the run.

    Richard
     
  20. Scale7JB

    Scale7JB Western Thunderer

    Lovely curves! ;)

    JB.