Recent Activity

Activity stream for all registered members at Western Thunder.

  1. AJC liked Tim Watson's post in the thread TFW’s workshop.

    Valour now has two safety valves. The low shroud was made by soldering a piece of brass the correct thickness to a larger lump so that...

    25 February 2020 at 01:45
  2. AJC liked Tim Watson's post in the thread TFW’s workshop.

    Those houses are all the same scale Tony, the massed effect gives a real effect of distance, not easily achieved in the larger scales....

    25 February 2020 at 01:44
  3. JimG liked Tim Watson's post in the thread TFW’s workshop.

    Valour now has two safety valves. The low shroud was made by soldering a piece of brass the correct thickness to a larger lump so that...

    25 February 2020 at 01:00
  4. adrian liked slatgrille's post in the thread Recommended to join for the expertise within.

    [ATTACH] [ATTACH] Hello, Let me introduce myself with a rather lame offer of images from my collection. (35mm shots taken by me in the...

    R07.04.01.jpg R07.20.01.jpg 24 February 2020 at 23:16
  5. Dan Randall liked slatgrille's post in the thread Recommended to join for the expertise within.

    [ATTACH] [ATTACH] Hello, Let me introduce myself with a rather lame offer of images from my collection. (35mm shots taken by me in the...

    R07.04.01.jpg R07.20.01.jpg 24 February 2020 at 22:05
  6. Dan Randall liked BrushType4's post in the thread Brushs Laser Cutting workbench.

    I’ve been experimenting with my own made rust paint. I’m quite pleased with the finish on my Intentio Corrugated Card. [ATTACH]

    C3C12F30-303D-4193-84E6-EE11A95A5C7C.jpeg 24 February 2020 at 22:04
  7. JimG liked BrushType4's post in the thread Brushs Laser Cutting workbench.

    I’ve been experimenting with my own made rust paint. I’m quite pleased with the finish on my Intentio Corrugated Card. [ATTACH]

    C3C12F30-303D-4193-84E6-EE11A95A5C7C.jpeg 24 February 2020 at 21:31
  8. Rob Pulham liked dibateg's post in the thread 7mm Finney 4992 Crosby Hall.

    I'm following in Micks footsteps again! This is an original Finney kit from sometime ago and was purchased by my client second hand....

    P1050532.JPG P1050534.JPG 24 February 2020 at 21:26
  9. D6356 liked Spitfire2865's post in the thread Spitfire's G3 Workbench.

    Tonight Ive almost managed to finish the internal planking. [ATTACH]

    20200217_211453.jpg 24 February 2020 at 21:22
  10. D6356 liked Spitfire2865's post in the thread Spitfire's G3 Workbench.

    Well, the wood finally came in after several setbacks and over a month of waiting. Cut from 2mm & 3mm MDF and 5mm (nominal) plywood....

    20200211_200733.jpg 20200211_200746.jpg 20200211_200910.jpg 24 February 2020 at 21:22
  11. 7mmMick replied to the thread 7mm Finney 4992 Crosby Hall.

    Make sure you give yourself a bit of room with the footplate overlay pal. I cleaned mine up and was happy with a snug fit until I...

    24 February 2020 at 21:19
  12. 7mmMick liked dibateg's post in the thread 7mm Finney 4992 Crosby Hall.

    I'm following in Micks footsteps again! This is an original Finney kit from sometime ago and was purchased by my client second hand....

    P1050532.JPG P1050534.JPG 24 February 2020 at 21:15
Loading...