Brushs Laser Cutting and 3d Printing workbench
- Thread starter BrushType4
- Start date
BrushType4
Western Thunderer
I'll get something written.
BrushType4
Western Thunderer
Shop front conversion of my terraced house kit.
Configurable name and date plaque too!
Configurable name and date plaque too!
Last edited:
Cliff Williams
Western Thunderer
With a small tweak you could make it into Arkwright's - Open All Hours.
Beautique, Balby 2005
Beautique, Balby 2005
BrushType4
Western Thunderer
That would be a nice terrace to model. Another one for the list!
BrushType4
Western Thunderer
I’ve been experimenting with my own made rust paint.
I’m quite pleased with the finish on my Intentio Corrugated Card.
I’m quite pleased with the finish on my Intentio Corrugated Card.
BrushType4
Western Thunderer
Either!!is it O or OO.......?
Tom Insole
Western Thunderer
It's funny I've never pictured the house I grew up in with a shop front but I do rather like it!
The bike's rather heavy duty! those tubes look almost thick enough to be motorbike spec...
This was my last cycling visit to a victorian 2 up 2 down
This one's a Primrose hill too.
Tom Insole
Western Thunderer
Maybe this wider shot from some years ago when I could handle drop bars would be a better representation....
BrushType4
Western Thunderer
BrushType4
Western Thunderer
BrushType4
Western Thunderer
Carrying on with Primrose Hill, here is a Coop or possibly a Coop converted into a Wetherspoons?
edit. In my haste to add a bricked up window I seem to have lost some bricks
edit. In my haste to add a bricked up window I seem to have lost some bricks
BrushType4
Western Thunderer
My recipe for the rust is wire wool soaked in white vinegar. The wire wool dissolves leaving a real rust liquid. Just brush on sparingly. cheap and easy. 
Brian T
Western Thunderer
My recipe for the rust is wire wool soaked in white vinegar. The wire wool dissolves leaving a real rust liquid. Just brush on sparingly. cheap and easy.
I bet that stink`s....?
Brian.
BrushType4
Western Thunderer
Not that nice on fish and chips either...I bet that stink`s....?
Brian.
BrushType4
Western Thunderer
My little shop kit that I joking said could be a ‘Spoons’ has morphed a bit as several people have asked me to make this into a pub.
So a little tinkering with an idea that’s been floating around since I saw Brian Lewis attempt something similar awhile back.
Laser engraved glass.
it’s actually incredibly easy and only took a couple of goes to fine tune the laser. I engraved on the back so the front of the glass is smooth.
So the artwork is reversed for engraving. I need to remember that.
Demo Built ready to paint.
I’ve a fancy 3 story version coming soon and I’m still working on my corner version.
So a little tinkering with an idea that’s been floating around since I saw Brian Lewis attempt something similar awhile back.
Laser engraved glass.
it’s actually incredibly easy and only took a couple of goes to fine tune the laser. I engraved on the back so the front of the glass is smooth.
So the artwork is reversed for engraving. I need to remember that.
Demo Built ready to paint.
I’ve a fancy 3 story version coming soon and I’m still working on my corner version.