A (nother) China Clay layout

Stubby47

Western Thunderer
I've been fortunate in being given the end of a roll of vinyl sheet used for those vertical pop-up adverts.
This is somewhat stronger than paper and takes paint very well.
 

matto21

Western Thunderer
I've been fortunate in being given the end of a roll of vinyl sheet used for those vertical pop-up adverts.
This is somewhat stronger than paper and takes paint very well.

We have some of those pop up signs in work. Maybe I could liber...actually probably not a good idea!

Matt
 

matto21

Western Thunderer
Morning all,

I'm meant to be focusing on the layout, and not stock building, but a Google search unearthed a photo taken at Pontsmill showing an SR brake van in one of the sidings. I couldn't help myself!

IMG_20190920_081711.jpg

First time using etched/sprung w-irons too and so far so good.

I've taken a leaf out of Geoff Kent's book regarding the doors. Debatable whether they'd be open when running but I like the bit of "life" it suggests. One side are open, and the other closed.

Matt
 

matto21

Western Thunderer
Some more progress.

IMG_20190923_102557.jpg

I'm reasonably pleased so far.

Note: the stove chimney is incorrectly located, I didn't realise until too late. Also, according to the instructions, the footboards are incorrect for the left hand ducketed van. However the correct variants were damaged in my kit leaving me little choice other than to rebuild them and I decided life is too short!

I've thought hard about glazing the windows but I'm probably not going to bother. Also, I'm undecided whether to use the kit buffers or purchase replacements...we'll see.

Matt
 

AJC

Western Thunderer
Don't forget the reinforcement/spacer plates (depending on prototype because these SR vans vary a lot). Layered 10 thou' for the reinforcement if it's there, 20 thou' for packing. Dad tells me that it's some sort of rubber on the real thing.

Adam
 

matto21

Western Thunderer
Don't forget the reinforcement/spacer plates (depending on prototype because these SR vans vary a lot). Layered 10 thou' for the reinforcement if it's there, 20 thou' for packing. Dad tells me that it's some sort of rubber on the real thing.

Adam

Where's this now - bufferbeams?
 

AJC

Western Thunderer
Where's this now - bufferbeams?

Yep. The Southern liked to add reinforcement plates on the outer corners of the headstock faces, but not on every brakevan. If you take a look at Paul Bartlett's collection: SR Brake vans - 4 wheeled ZTO ZTV ZPO ZPW ZTR ZXR ZTQ ZTP you'll hopefully see what I mean. Some (possibly most) of these 25t vans had packing immediately behind the buffer. The example dad is involved in working on at Yeovil Junction (ex-WD/MoD) has rubber packing which is presumably as new but some had wooden packing, clearly apparent in some of Paul's pics - it just fits immediately behind the buffer casing spacing it out from the headstock.

Adam
 

AJC

Western Thunderer
I see it now... I have to admit I hadn't noticed it before though!

It's the little details that are key - solebar brackets, for example; the way they link the body to the underframe visually makes a huge difference to a model. These perhaps less so, but once you know that they're present...

Adam
 

matto21

Western Thunderer
Hi all,

Barring a few tweaks to the paint, and a coat of flat varnish I'm calling this done:

IMG_20191004_171149.jpg

IMG_20191004_171133.jpg

IMG_20191004_171053.jpg

I'm aware of the errors but as I said in my last post, the overall look is more important than total accuracy.

Markings are a mix of Modelmaster, Fox and Railtec.

What did I learn from this model? I used etched wheel irons for the first time and, unlike my as yet unpainted Dapol brake van, I replaced all the handrails with wire and what a difference it makes!

In other news, I also cut some wood for a one piece backscene:

IMG_20191004_171209.jpg

Any questions or comments, let me know.

Matt
 

AJC

Western Thunderer
It’s looking good - I like the finish you’ve achieved on the ‘van, very plausible.

I’ve spent 10 minutes this afternoon sorting various ply offcuts for baseboard construction purposes (and in an attempt to work out what other bits are still required). More clamps are a priority!

Adam
 
Top